Home » Sectoral Industrial Chain Solutions » Recycling Industry Chain Solutions
Recycling Industry Chain Solutions

ISO 14001 Environmental Management | Shock and Wear Resistant Chains | Since 1976

Recycling lines never know exactly what is coming next. Plastic, glass, metal, wood and wet organic waste arrive mixed and in fluctuating volumes, so chains in these plants face impact, abrasion, moisture and corrosion at the same time. A chain that is not designed for this load quickly causes unplanned stops.

Zimaş Zincir manufactures scraper chains, welded plate chains and roller chains for feeding, sorting, conveying and baling equipment in recycling and solid waste plants, in its integrated facility in Bursa.

🏭 Transmission Chain Manufacturing in Türkiye Since 1976

Founded in 1976 in the Bursa Demirtaş Organized Industrial Zone, Zimaş Zincir ve Makine San. Tic. A.Ş. is the first company of Topbaş Group. Every production stage, from material preparation to heat treatment and assembly, is carried out in-house.

  • ✓ Over 3,500 chain dies for a wide production range
  • ✓ Over 5,000 tons of annual heat treatment capacity
  • ✓ Exports to Europe, the Middle East and neighboring countries
  • ✓ IATF 16949, ISO 9001, ISO 14001, ISO 27001 certifications

♻️ Built for Mixed Waste

Sharp metal and glass, sand and glass dust and acidic leachate attack chains constantly. Pins, bushings and rollers are hardened in-house to resist this wear.

🔧 Attachments Designed for Your Waste

Scraper and plate attachments are designed in steel plate, cast or other materials depending on the material being conveyed, and produced after customer approval.

Zimaş Zincir in Figures

1976
Year Founded
3,500+
Chain Dies
5,000+ t
Annual Heat Treatment Capacity
IATF 16949
Automotive Quality System

Why Chains Wear Quickly in Waste and Recycling Plants

Understanding the causes of wear is the first step toward the right chain selection. The main causes are:

  • Impact and cutting parts: Heavy and sharp pieces dropping onto conveyors create shock loads.
  • Abrasive contamination: Sand, glass dust and soil penetrate the joints.
  • Moisture and leachate: Wet waste and compost lines cause corrosion.
  • Wrapping: Film, string and wire wrap around chains and sprockets.
  • Variable load: Fluctuating feed volumes create uneven loading on the chain.

Application Areas

Zimaş chains are used from municipal solid waste sorting plants to scrap yards, baling presses and refuse derived fuel lines. All our industry solutions are listed on the industrial chain solutions by sector page.

Solid Waste Sorting and MBT Plants

  • Feed hoppers and apron feeders: Welded plate chains for heavy feeding
  • Manual and automatic sorting cabins: Conveyor chains for sorting belts
  • Trommel and ballistic separator outlets: Conveyor chains for separated fractions
  • Compost lines: Chains for wet and corrosive environments

Scrap and Metal Recycling

  • Shredder infeed and outfeed: Impact resistant conveyor chains
  • Scrap yard conveyors: Scraper Chains for scrap handling
  • Metal separation: Transfer chains for separation lines

Paper, Plastic and Glass Recycling

  • Baler infeed conveyors: Conveyor chains for baling presses
  • Plastic shredding and washing: Chains for wet transport
  • Glass cullet handling: Chains for conveying and screening cullet

Energy Recovery and RDF Plants

  • RDF preparation lines: Conveyor chains for fuel preparation
  • Boiler feeding: Drive and conveyor chains
  • Ash and slag conveyors: Scraper Chains for ash and slag removal

Chain Selection by Application

ApplicationRecommended Zimaş ProductWhy
Apron feeder, heavy impact feedingWelded Plate ChainsThe plate surface absorbs impact and carries material directly
Bulk waste, ash, slagScraper ChainsDrags material along the trough
Sorting lines, smooth flowOutside Roller ChainsStable running on guide rails with low vibration
Heavy drive, dirty environmentAPI Rotary ChainsCranked link design for flexibility and shock resistance
General drivesRoller Chains (DIN 8187 / DIN 8188)Standard dimensions for direct replacement
For corrosion prone wet waste and compost lines, surface treatment and material are selected according to application data. Please share the waste type and line conditions with your inquiry.

Why Zimaş for Recycling Plants

🛠️ Custom Attachment Design

Scraper and plate attachments designed in steel, cast or other materials according to the waste type.

🔥 Hardened Surfaces

Pins, bushings and rollers are hardened in our own heat treatment facility.

🌱 Environmental Responsibility

Production under an ISO 14001 environmental management system.

  • Compatibility with existing equipment: Chains for imported equipment can be produced from a sample or technical drawing.
  • Large die archive: More than 3,500 chain dies for new and existing lines.

Maintenance Recommendations

  1. Daily visual check: At the end of each shift, remove film, wire and string wrapped around chains and sprockets.
  2. Weekly tension check: Check tension weekly on conveyors that run under variable load.
  3. Replace damaged attachments promptly: A single bent or broken scraper can overload the whole chain.
  4. Protection after washing: After plant cleaning, dry the chain and apply a protective oil.

Frequently Asked Questions

1. Which chain type should a waste sorting plant use?

Welded plate chains are generally used for apron feeders, scraper chains for bulk material and residues, and outside roller chains for sorting conveyors. The final choice depends on the waste type and capacity.

2. Can scraper attachments be made replaceable?

Yes. Attachments can be designed as bolted, replaceable parts so that worn scrapers can be changed without replacing the whole chain.

3. Do you supply recycling machine manufacturers for series production?

Yes. We work on a project basis with machine builders and deliver chains ready to fit, cut to length and with the required attachments.

Put an End to Chain Related Stops

Share your line and waste type, and our engineering team will determine the right chain solution with you.

Request a Quote

Reliable Chain Supplier for the Recycling Industry

Zimaş manufactures scraper, welded plate and conveyor chains for recycling and solid waste plants in its integrated facility in Bursa.

As part of Topbaş Group, we continue to serve the recycling industry with the confidence that comes from dynamism, experience, consistent quality and customer satisfaction.

Talep Edilen: Ürün Kataloğu