
IATF 16949 and ISO 9001 Certified | Heavy Duty Conveyor Chains | Since 1976
A cement plant runs around the clock, and its conveyors rarely get a break. When a chain fails on a clinker conveyor, an apron feeder or a packing line, the effect spreads quickly: the kiln schedule is disrupted, silos fill up or run empty and dispatch stops. In this sector, chain reliability directly determines plant availability.
Zimaş Zincir manufactures conveyor and drive chains for cement plants in its integrated facility in Bursa, where every step from material preparation to heat treatment and assembly is carried out in-house. Our scraper chains, welded plate chains and roller chains are designed for abrasive dust, high temperatures and heavy loads.
🏭 Transmission Chain Manufacturing in Türkiye Since 1976
Founded in 1976 in the Bursa Demirtaş Organized Industrial Zone, Zimaş Zincir ve Makine San. Tic. A.Ş. is the first company of Topbaş Group. Every production stage, from material preparation to heat treatment and assembly, is carried out in-house.
- ✓ Over 3,500 chain dies for a wide production range
- ✓ Over 5,000 tons of annual heat treatment capacity
- ✓ Exports to Europe, the Middle East and neighboring countries
- ✓ IATF 16949, ISO 9001, ISO 14001, ISO 27001 certifications
🏗️ Designed for Clinker and Dust
Clinker, raw meal and cement dust are highly abrasive and penetrate chain joints continuously. Our cement industry chains are produced with heat treated pins, bushings and rollers that combine a hard, wear resistant surface with a tough core.
🔧 Engineering Based on Your Existing Chain
For conveyors built with imported chains, a sample or technical drawing is sufficient. Our engineering team evaluates dimensions, material and attachments and produces a domestic alternative after customer approval.
Zimaş Zincir in Figures
What a Cement Plant Expects from a Chain
Chains in cement plants face several stresses at the same time. The key requirements are:
- Wear resistance: Hardened pins, bushings and rollers against the abrasive effect of clinker and raw meal.
- High breaking strength: Heavy material loads and long conveyor centers without permanent elongation.
- Thermal stability: Stable operation in the kiln, clinker cooler and preheater zones where temperatures fluctuate.
- Resistance to alkaline dust: Surface protection against corrosion caused by cement dust and moisture.
- Continuous duty: Reliable performance in round the clock operation with limited maintenance windows.
Application Areas in Cement Plants
Zimaş chains are used from the quarry to the dispatch area. You can see all our industry applications on the industrial chain solutions by sector page.
Raw Material Preparation and Feeding
- Apron feeders: Welded plate chains that carry limestone and clay from the crusher
- Crusher discharge conveyors: Impact resistant conveyor chains
- Additive feeding: Drive chains for gypsum, trass and additive bins
Kiln, Clinker Cooler and Preheater
- Drag chain conveyors: Scraper Chains that carry hot clinker
- Clinker cooler discharge: Heavy duty conveyor chains for hot zones
- Dust return lines: Scraper chains for filter dust and spillage
Grinding and Storage
- Cement mill feeding: Drive and conveyor chains for mill feed systems
- Bucket elevators: Attachment chains for vertical transport
- Silo discharge: Chains for silo extraction and transfer conveyors
Packing and Dispatch
- Packing machines: Roller Chains for rotary packers and bag conveyors
- Truck and wagon loading: Conveyor chains for loading lines
- Palletizing: Drive chains for palletizers and bag handling
Chain Selection by Application
| Application | Recommended Zimaş Product | Why |
|---|---|---|
| Apron feeder, lumpy material | Welded Plate Chains | The plate surface absorbs impact and carries material directly |
| Clinker, raw meal, dust | Scraper Chains | Drags abrasive bulk material along the trough |
| Very heavy load, low speed | Gall Chains | Large pin, bushing and link structure for high tensile load |
| Packing and general drives | Roller Chains (DIN 8187 / DIN 8188) | Standard dimensions for direct replacement |
🔗 All Our Products for the Cement Industry:
Scraper Chains Welded Plate Chains Roller Chains Gall Chains API Rotary ChainsWhy Zimaş Chains for Cement Plants
⚙️ Integrated Production
Machining, heat treatment, die making and assembly in the same plant. Quality is traceable at every stage.
🔥 Heat Treatment Infrastructure
Case hardening, quenching and tempering, carbonitriding and induction hardening are performed in-house.
🔬 Laboratory Control
Hardness measurement, chemical analysis, microstructure examination and tensile tests are reported.
- Large die archive: More than 3,500 chain dies make it possible to reproduce chains for existing conveyors.
- Quality systems: Production certified to IATF 16949, ISO 9001 and ISO 14001.
Practices That Extend Chain Life in Cement Plants
- Elongation check: Measure the chain over a fixed number of pitches during planned shutdowns and compare it with the nominal length.
- Lubrication: Use lubricants suitable for dust and high temperatures. In dusty areas, dry or non sticky lubricants reduce abrasive build-up.
- Tension and alignment: Check sprocket alignment and chain tension. Most premature failures start with misalignment or incorrect tension.
- Sprocket inspection: Replace worn or hooked sprockets together with the chain, as worn teeth shorten the life of a new chain.
- Spare stock: Keep at least one set of chains for critical conveyors such as the clinker conveyor and apron feeder.
Frequently Asked Questions
1. Can Zimaş chains replace the chains currently used in our cement plant?
Yes. Our chains are produced to DIN and ISO standards and can directly replace chains of the same standard and size. For special conveyor chains, a sample or technical drawing is enough for us to produce an equivalent.
2. Do you offer chains for high temperature zones?
Yes. For the kiln, clinker cooler and preheater zones, material, heat treatment and lubrication are selected according to the operating temperature data you provide.
3. Which chain is used on a clinker conveyor?
Drag chain conveyors usually use scraper chains, while pan and apron conveyors use welded plate chains. The final choice depends on material temperature, capacity and conveyor geometry.
4. Can you produce custom attachments for our conveyor?
Yes. Scraper and plate attachments are designed according to the material conveyed and the conveyor geometry, and produced after customer approval.
🏭 Related Sector Solutions:
All Sector Chain Solutions Automotive Industry Food Industry Packaging Industry Agricultural Machinery Recycling and Solid Waste Forklift and Lifting Equipment Iron and Steel Industry Oil, Gas and Drilling Mining and Quarries About Us: History and Certificates Manufacturing CompetenciesKeep Your Cement Lines Running
Share your conveyor type and current chain size, and our engineering team will determine the right chain solution with you.
Request a QuoteChain Supplier for the Cement Industry
Plan your chain needs ahead of planned shutdowns to avoid long waits for imported parts. Zimaş manufactures standard and application specific chains for cement plants in its integrated facility in Bursa.
As part of Topbaş Group, we continue to serve the cement industry with the confidence that comes from dynamism, experience, consistent quality and customer satisfaction.
Zimaş Zincir ve Makine San. Tic. A.Ş. | Topbaş Group
Chain Supplier to the Cement Industry Since 1976
www.zimaszincir.com.tr