
IATF 16949 and ISO 9001 Certified | Heavy Duty Chains | Since 1976
In mining, chains move ore from the pit to the crusher and from the crusher to the stockpile. Along the way they face abrasive rock, impact loads, dust, moisture and continuous operation. When a chain fails, the flow of material stops and the whole operation waits.
Zimaş Zincir manufactures scraper chains, welded plate chains, API rotary chains and Gall chains for underground mines, open pits, quarries and ore processing plants in its integrated plant in Bursa.
🏭 Transmission Chain Manufacturing in Türkiye Since 1976
Founded in 1976 in the Bursa Demirtaş Organized Industrial Zone, Zimaş Zincir ve Makine San. Tic. A.Ş. is the first company of Topbaş Group. Every production stage, from material preparation to heat treatment and assembly, is carried out in-house.
- ✓ Over 3,500 chain dies for a wide production range
- ✓ Over 5,000 tons of annual heat treatment capacity
- ✓ Exports to Europe, the Middle East and neighboring countries
- ✓ IATF 16949, ISO 9001, ISO 14001, ISO 27001 certifications
💎 Hard Surface, Tough Core
Case hardening, quenching and tempering and induction hardening give chain components a wear resistant surface and a tough core that withstands impact.
🔧 Engineering Based on Your Existing Chain
From a sample or technical drawing, we reverse engineer your chain and offer a domestic alternative to imported mining chains.
Zimaş Zincir in Figures
Challenges Mining Chains Face
Mining is one of the most demanding environments for chains. The main challenges are:
- Abrasive material: Rock, ore and sand wear down pins, bushings and plates.
- Impact loads: Lumps dropped onto conveyors create shock loads.
- Dust and moisture: Contamination penetrates joints and causes corrosion.
- Continuous operation: Long operating hours with limited maintenance windows.
- Underground conditions: Confined spaces, moisture and difficult access for maintenance.
Application Areas in Mining
Zimaş chains are used in underground mining, open pits, ore processing and shipping. All our industry solutions are listed on the industrial chain solutions by sector page.
Underground Mining
- Scraper conveyors: Scraper Chains for armored and chain conveyors
- Loader and haulage drives: Heavy duty drive chains
- Gallery transfer lines: Conveyor chains for underground transport
Open Pit Mines and Quarries
- Apron feeders: Welded plate chains for crusher feeding
- Crusher discharge conveyors: Impact resistant conveyor chains
- Screen drives: Drive chains for vibrating screens
🔗 Recommended Products for Open Pit Mines and Quarries:
Scraper Chains Welded Plate Chains API Rotary Chains Gall ChainsOre Preparation and Beneficiation
- Washing and jig units: Chains for wet environments
- Bucket elevators: Attachment chains for vertical transport
- Concentrate and tailings lines: Conveyor chains
Stockyard and Shipping
- Reclaim conveyors: Chains for stockyard reclaiming
- Silo and bunker discharge: Feeding and discharge chains
- Truck and wagon loading: Conveyor chains for loading lines
Chain Selection by Application
| Application | Recommended Zimaş Product | Why |
|---|---|---|
| Bulk material drag | Scraper Chains | Drags bulk material along the trough |
| Heavy drive in dirty environments | API Rotary Chains (DIN 8182) | Cranked links for flexibility and shock resistance |
| Very high tensile load at low speed | Gall Chains | Large pin and plate structure |
| Lumpy load, apron feeder | Welded Plate Chains | The plate surface absorbs impact and carries material |
| General power transmission | Roller Chains (DIN 8187 / DIN 8188) | Standard dimensions for direct replacement |
🔗 All Our Products for the Mining Sector:
Scraper Chains API Rotary Chains Gall Chains Welded Plate Chains Roller ChainsWhy Zimaş for Mining
🛠️ Application Specific Design
Chains and attachments designed according to material, capacity and conveyor geometry.
🔥 Multiple Heat Treatment Methods
Case hardening, quenching and tempering, carbonitriding and induction hardening in-house.
🔬 Testing and Reporting
Hardness, chemical analysis, microstructure and tensile test results are reported.
- Large die archive: More than 3,500 chain dies make it possible to reproduce chains for discontinued equipment.
- Quality systems: Production certified to IATF 16949 and ISO 9001.
Practices That Extend Mining Chain Life
- Correct tension: Keep the chain at the tension specified by the conveyor manufacturer.
- Control material drop: Reduce the drop height of material onto the conveyor to limit impact loads.
- Lubricant selection: In dusty areas, use lubricants that do not attract abrasive particles.
- Elongation measurement: Measure the chain over a fixed number of pitches and replace it once the manufacturer's limit is exceeded.
- Sprocket and rail check: Inspect sprockets and guide rails, as worn components shorten chain life.
Frequently Asked Questions
1. Which chain types are used on mining conveyors?
Scraper chains are generally used for bulk material transport, welded plate chains for apron feeders, API rotary chains for heavy drives and Gall chains for very high loads at low speed.
2. How does an API rotary chain differ from a standard roller chain?
An API rotary chain has cranked links that provide flexibility and better shock absorption in dirty, heavy duty environments.
3. Can an imported mining chain be replaced with a domestic one?
Yes. From a sample or technical drawing, our engineering team designs an equivalent chain, and production starts after customer approval.
4. What materials are scraper attachments made from?
Scraper attachments are produced from steel plate, cast or other materials depending on the conveyed material and the level of abrasion.
🏭 Related Sector Solutions:
All Sector Chain Solutions Cement Industry Automotive Industry Food Industry Packaging Industry Agricultural Machinery Recycling and Solid Waste Forklift and Lifting Equipment Iron and Steel Industry Oil, Gas and Drilling About Us: History and Certificates Manufacturing CompetenciesLet's Find the Right Chain for Your Site
Share your conveyor type and current chain size, and our engineering team will determine the right solution with you.
Request a QuoteReliable Chain Supplier for Mines and Quarries
Zimaş manufactures heavy duty conveyor and drive chains for mines, quarries and ore processing plants in its integrated facility in Bursa.
As part of Topbaş Group, we continue to serve the mining sector with the confidence that comes from dynamism, experience, consistent quality and customer satisfaction.
Zimaş Zincir ve Makine San. Tic. A.Ş. | Topbaş Group
Chain Supplier to Mines and Quarries Since 1976
www.zimaszincir.com.tr