
IATF 16949 and ISO 9001 Certified | API Rotary Chains | Since 1976
Drilling rigs and field equipment run under heavy load, shock and vibration, far from workshops and spare parts warehouses. A chain failure on the drawworks, rotary table or mud pump stops drilling and every hour of downtime is costly.
Zimaş Zincir manufactures API rotary chains, Gall chains and multi strand roller chains for drilling equipment and heavy field applications in its integrated plant in Bursa.
🏭 Transmission Chain Manufacturing in Türkiye Since 1976
Founded in 1976 in the Bursa Demirtaş Organized Industrial Zone, Zimaş Zincir ve Makine San. Tic. A.Ş. is the first company of Topbaş Group. Every production stage, from material preparation to heat treatment and assembly, is carried out in-house.
- ✓ Over 3,500 chain dies for a wide production range
- ✓ Over 5,000 tons of annual heat treatment capacity
- ✓ Exports to Europe, the Middle East and neighboring countries
- ✓ IATF 16949, ISO 9001, ISO 14001, ISO 27001 certifications
⛓️ Cranked Link Design
Rotary chains use cranked (offset) links. This structure gives the chain flexibility and helps absorb shock loads in dirty, demanding environments.
🚚 Domestic Production, Short Supply Chain
Producing in Türkiye shortens supply times compared with imported chains. Custom lengths can be prepared from a sample or technical drawing.
Zimaş Zincir in Figures
Advantages of Rotary Chains
Rotary chains are preferred in drilling and heavy field applications because they offer:
- Shock absorption: The cranked link structure tolerates sudden load peaks.
- Resistance to contamination: Reliable running in mud, dust and oil.
- High tensile strength: Power transmission for heavy drives.
- Multi strand options: Higher capacity with multiple strands.
- Standard compliance: Produced to DIN 8182 dimensions.
Application Areas
Zimaş chains are used on drilling rigs, pumps and other heavy field equipment. All our industry solutions are listed on the industrial chain solutions by sector page.
Drilling Rigs
- Drawworks: Drive chains for the hoisting system
- Rotary table: Rotary table drive chains
- Compound drives: Power transmission from engines to the gearbox
Pumps and Field Equipment
- Mud pumps: Pump drive chains
- Workover and well service units: Drive chains for service rigs
- Generators and compressors: Drive chains for auxiliary equipment
Other Heavy Field Applications
- Water well and geothermal drilling: Drive chains for drilling rigs
- Mining and quarries: See our mining chain solutions
- Construction and piling machines: Heavy duty drive chains
Chain Selection by Application
| Application | Recommended Zimaş Product | Why |
|---|---|---|
| Heavy drive under shock, dirty environment | API Rotary Chains (DIN 8182) | Flexibility and shock absorption from cranked links |
| Very high tensile load at low speed | Gall Chains | Large pin and plate structure |
| Auxiliary equipment drives | Roller Chains (DIN 8187 / DIN 8188, multi strand) | Standard dimensions, easy sourcing |
Why Zimaş for Drilling Applications
🏭 Domestic Production
Integrated production in Bursa shortens supply times.
🔬 Heat Treatment and Laboratory
In-house heat treatment, hardness measurement, chemical analysis and tensile tests.
🌍 Export Experience
Supply to customers in Europe, the Middle East and neighboring countries.
- Large die archive: More than 3,500 chain dies for new and replacement chains.
- Quality systems: Production certified to IATF 16949, ISO 9001 and ISO 14001.
Field Maintenance Recommendations
- Regular lubrication: Lubricate the chain regularly and clean off mud and dirt.
- Elongation check: Measure the chain over a fixed number of pitches and replace it once the manufacturer's limit is exceeded.
- Tension check: Check tension, especially after heavy load periods.
- Spare chain: Keep a spare chain for critical drives at the site.
Frequently Asked Questions
1. What is the difference between a rotary chain and a standard roller chain?
A rotary chain has cranked links, which make it more flexible and better at absorbing shock loads. Standard roller chains have straight inner and outer plates and are used for general power transmission.
2. To which standard are rotary chains manufactured?
Our rotary chains are manufactured to DIN 8182 dimensions.
3. Can you prepare custom length chains for drilling equipment?
Yes. Chains are prepared in the required length and number of strands, based on a sample or technical drawing.
🏭 Related Sector Solutions:
All Sector Chain Solutions Cement Industry Automotive Industry Food Industry Packaging Industry Agricultural Machinery Recycling and Solid Waste Forklift and Lifting Equipment Iron and Steel Industry Mining and Quarries About Us: History and Certificates Manufacturing CompetenciesRotary Chain Solutions for Your Site
Share your equipment details and current chain size, and our engineering team will determine the right solution with you.
Request a QuoteChain Supplier for Drilling and Heavy Field Applications
Zimaş manufactures rotary chains, Gall chains and roller chains for drilling rigs and heavy field equipment in its integrated facility in Bursa.
As part of Topbaş Group, we continue to serve the drilling sector with the confidence that comes from dynamism, experience, consistent quality and customer satisfaction.
Zimaş Zincir ve Makine San. Tic. A.Ş. | Topbaş Group
Chain Supplier for Drilling Applications Since 1976
www.zimaszincir.com.tr