Home » Sectoral Industrial Chain Solutions » Automotive Industry Chain Solutions
Automotive Industry Industrial Chain Solutions

IATF 16949 Certified | Lot Traceability | Since 1976

Automotive production runs at a fixed takt. Body conveyors, paint shop lines, press feeders and assembly conveyors all depend on chains that move at the same pace, every shift. A single chain failure can stop an entire line, and in just in time production the impact reaches suppliers and customers within hours.

Zimaş Zincir manufactures conveyor and drive chains for automotive manufacturers and Tier 1 suppliers under an IATF 16949 quality management system. Every stage, from material preparation to heat treatment and assembly, takes place in our integrated plant in Bursa, one of Türkiye's leading automotive production centers.

🏭 Transmission Chain Manufacturing in Türkiye Since 1976

Founded in 1976 in the Bursa Demirtaş Organized Industrial Zone, Zimaş Zincir ve Makine San. Tic. A.Ş. is the first company of Topbaş Group. Every production stage, from material preparation to heat treatment and assembly, is carried out in-house.

  • ✓ Over 3,500 chain dies for a wide production range
  • ✓ Over 5,000 tons of annual heat treatment capacity
  • ✓ Exports to Europe, the Middle East and neighboring countries
  • ✓ IATF 16949, ISO 9001, ISO 14001, ISO 27001 certifications

🚗 Automotive Quality Standards

IATF 16949 certification means our processes follow the quality requirements of the automotive industry. Chains are delivered with lot traceability and the documentation needed for supplier approval processes.

🔧 Line Specific Engineering

Conveyor chains with special attachments, extended pins or hollow pins are designed according to your line layout, product weight and carrier geometry, and produced after approval.

Zimaş Zincir in Figures

1976
Year Founded
3,500+
Chain Dies
5,000+ t
Annual Heat Treatment Capacity
IATF 16949
Automotive Quality System

What Automotive Lines Expect from a Chain

Chains in automotive plants must deliver repeatable performance across thousands of cycles. The main requirements are:

  • Dimensional accuracy: Consistent pitch and tight tolerances for precise positioning of bodies and parts.
  • Synchronized running: Matched strands for parallel conveyors carrying wide loads.
  • Temperature resistance: Stable operation through paint drying ovens and pre-treatment areas.
  • Quiet operation: Smooth running for assembly areas where operators work alongside the conveyor.
  • Traceability: Lot based documentation to support quality audits and supplier approval.

Application Areas in the Automotive Industry

Zimaş chains are used across vehicle production, from press shops to final assembly. All our industry solutions are listed on the industrial chain solutions by sector page.

Assembly Lines

  • Body in white conveyors: Chains for skid and carrier transport
  • Engine and powertrain assembly: Conveyor chains with attachments
  • Chassis and seat lines: Roller Chains with Extended Pins for parallel transport

Paint Shop and Surface Treatment

  • Pre-treatment and e-coat lines: Conveyor chains resistant to moisture and chemicals
  • Drying ovens: Chains selected for high temperature operation
  • Overhead conveyors: Chains for hanging carriers

Press Shop and Forming

  • Transfer presses: Drive chains for sheet metal transfer
  • Press feeding: Chains for blank feeding and stacking
  • Scrap removal: Scraper Chains for press scrap conveyors

Storage and Logistics

  • Accumulation conveyors: Outside Roller Chains for smooth accumulation
  • Transfer systems: Drive chains for transfer tables and lifts
  • Automated storage: Lifting and conveying chains for warehouse systems

Chain Selection by Application

ApplicationRecommended Zimaş ProductWhy
Drive and power transmissionRoller Chains (DIN 8187 / DIN 8188)Standard dimensions, direct interchangeability
Parallel transport, wide loadsRoller Chains with Extended PinsMatched and marked strands for synchronized running
Cross rods and fixturesHollow Pin ChainsHollow pins allow fixtures to be mounted without modifying the chain
Accumulation, guide rail conveyingOutside Roller ChainsLow vibration running on guide rails
Heavy carriers, plate conveyorsWelded Plate ChainsThe plate surface carries and positions the product
For oven and paint shop lines, please share the maximum temperature and the chemicals used in pre-treatment so that material and surface treatment can be selected accordingly.

Why Zimaş Chains for Automotive Lines

🏅 IATF 16949

Quality management system aligned with the requirements of the automotive industry.

🔥 Heat Treatment Infrastructure

Case hardening, quenching and tempering, carbonitriding and induction hardening are performed in-house.

🔬 Laboratory Control

Hardness measurement, chemical analysis, microstructure examination and tensile tests are reported.

  • Close to the automotive cluster: Production in Bursa, close to many vehicle and component plants.
  • Large die archive: More than 3,500 chain dies for both new lines and replacement chains.

Maintenance Recommendations for Automotive Conveyors

  1. Planned inspection: Check tension, wear and lubrication at regular intervals, ideally during scheduled shutdowns.
  2. Elongation measurement: Measure the chain over a fixed number of pitches and replace it once the manufacturer's limit is exceeded.
  3. Replace parallel strands together: On parallel conveyors, always replace both strands as a matched set.
  4. Lubrication in ovens: Use lubricants rated for the oven temperature to prevent carbonization.
  5. Attachment check: Inspect attachments and fixtures for deformation that can cause positioning errors.

Frequently Asked Questions

1. Why is IATF 16949 important for a chain supplier?

IATF 16949 is the quality management standard of the automotive industry, built on ISO 9001. It requires defined processes for risk management, traceability and continuous improvement, which supports supplier approval processes.

2. Do you provide documentation for supplier approval?

Yes. Chains are delivered with lot traceability, and the documentation required for supplier approval processes can be prepared for project based supply.

3. Can you produce chains with special attachments for our line?

Yes. Based on your drawing or sample, attachments, extended pins or hollow pin designs are engineered for your line and produced after approval.

4. Which standards do your chains comply with?

Our roller chains are manufactured to DIN 8187 and DIN 8188, in line with ISO 606, so they are interchangeable with chains of the same series and size.

Reliable Chains for Your Production Line

Share your line type and chain requirements, and our engineering team will work out the right solution with you.

Request a Quote

Chain Supplier for the Automotive Industry

Zimaş supplies standard roller chains and line specific conveyor chains to automotive manufacturers and suppliers from its integrated plant in Bursa.

As part of Topbaş Group, we continue to serve the automotive industry with the confidence that comes from dynamism, experience, consistent quality and customer satisfaction.

Talep Edilen: Ürün Kataloğu